Tighten all of the screws (Brackets, Amp and you can Video game-Changer)

Tighten all of the screws (Brackets, Amp and you can Video game-Changer)

Referring to Pictures 2 and you can step 3, slide the remainder 7 rates wild on the this new mounts and you can bolt Video game Changer to your better status (alone broad sufficient for this to squeeze in). Bolt about shop bin just below the latest Cd Changer which have new a lot of time front side supposed to the in order to shock tower.

Allow me to share detailed recommendations towards the installation of the fresh new Cd Changer when you look at the Left-Bottom fender part of the trunk out-of good 1999 BMW E46 3-Series Sedan

After having heard of practical construction in the exact middle of this new parcel shelf one, into “fuzzy protection” set up, requires a hefty bite outside of the useful trunk room, Stephen investigated it alternative installation that is INFINITELY More straightforward to the fresh basic set up since the confirmed of the Photographs 4-seven below.

NOTE: Such advice don’t affect E46 that have BMW Routing System. If your vehicle provides the NAV system, you have the new supports and you will coverage strung.

Plug about Video game Changer fuel and study wiring (the newest cabling is wrapped in fuzzy tape and can be found tucked in the fender aids)

And now, new information (my vehicle enjoys each other a good Harmon-Kardon Sound system and you may Split-Folding Butt Seating, so you could have to to improve the newest advice correctly)

  1. Remove the Spare tire shelter while the left-butt carpeting panel in the trunk. It’s stored set up of the about three increasing a couple-bit plastic rivets. The foremost is by the all the way down leftover of the taillight, the following in the upper center of the top trim committee, and the 3rd is actually trailing the left-butt seat reinforce (you have to lower the kept Split up-Folding Rear Seat to availableness this rivet and take off the new panel). These rivets try removed by the lifting the internal “pin” hence forces on outer “molly”. An apartment screwdriver will come in useful here, merely pry both disks the thing is aside, eliminate the “pin”, then take away the “molly”.

Writing about Photos step one and you will dos (new steel places toward bluish material), slip price insane for the openings that don’t have them (you really need to just need you to definitely a lot more; you will find five on to the floor, one above the wonder tower on the right, and you will three on the rear fender aids). Now complement the 2 supports (that have amplifier climbed) towards the price nuts and you may bolt in place (once again, little finger rigid).

Cure Computer game Changer delivery bolts regarding bottom (security holes having black soil avoidance “dot” stickers). Find out if wonder springs is actually built having horizontal setting up (and you may coverage that have spring season lock –into the stickers). Mount quick “L” mounts to help you corners with the pass openings (the new offered foot happens across the changer top towards the quick of your L facing give).

Making reference to Images 2 and you will 3, fall the remaining eight rate wild onto the the fresh supports and you will bolt Computer game Changer towards the ideal position (alone wide adequate for this to fit in). Bolt regarding the shops bin following next the new Cd Changer with the new much time side supposed to the so you can amaze tower.

  1. Remove the left-rear flooring holder. There was easy-into defense that is situated side in order to straight back, take it off by lifting up on the fresh leftover front and you can change it towards the spare tire. This can present a couple much more increasing several-part plastic material rivets (speaking of some unique of the carpeting ones, Do not mix them up).
  2. You are going to observe that there are 2 brackets that are Klik nu op deze link holding this new amp set up. Unbolt the latest amp supports regarding fender supports and you may trunk flooring and you will unplug the fresh amplifier. Referring to Image 2, unbolt the fresh new amp on stock supports and bolt it (digit rigorous) on the brackets.

Published by

James Baggott

James Baggott is the founder of Blackball Media. Until January 2013, he was the editor of the company's award winning motor trade magazine, Car Dealer. Now he focusses his time on developing the Blackball Media business overall and looking after the growing automotive services arm of the firm. And polishing his monkey bike that sits in his office...